Spring Energized Seal, Hiper Seal, PTFE Seal, Oil Seal

• Customization: Available
• Material: PTFE/Steel
• Usage: Transmission
• Model NO.: spring energized seals
• Type: Standard
• Speed: High Speed
• Pressure: Pressure Type
• Lip: Single Lip
• Standard: Standard
• Spring Energized Seal: Peek
• PTFE Seal: PTFE/Stainless Steel
• Spring Seal: PTFE
• Dry Gas Seal: Spring Energized Seal
• Oil Seal: Triple Lip Seal
• Transport Package: Neutral Packing or Customized Packing
• Specification: all sizes
• Trademark: Trisun
• Origin: China
• HS Code: 84842000
• Production Capacity: 200, 000

Product Description

Spring energized seals excel in applications with high-speeds, wide temperature ranges and those with corrosive media.

Our Spring energized PTFE Seals are classified as follows:
Springs have three types: Cantilevered spring, Helical spring, Canted coil spring.

Trisun designs and manufactures PTFE and other high-performance polymer composite spring-energized seals in inch and metric sizes for linear or reciprocating rod and piston sealing applications, for rotating shafts and bores, and for static and axial face sealing applications of low and high viscous liquids and gaseous media under low and high pressure up to 10,000psi (690bar), including vacuum sealing.

JACKET MATERIALS AVAILABLE
Virgin PTFE: Recommended for most static applications
Graphite Filled PTFE: Recommended for dynamic applications
Carbon Filled PTFE: Recommended for higher pressure dynamic applications
Polymer Filled PTFE: Recommended for dynamic applications and long service life
UHMW-Polyethylene: Recommended for abrasive media at temperatures up to 200°F
Hytrel: Recommended for abrasive media at temperatures up to 315°F
PEEK: High strength plastic recommended for temperatures up to 500°F
Other Materials: Many more PTFE compounds and other plastics available. Contact Marco Rubber's engineering team for specific information.

SPRING MATERIALS AVAILABLE
301 SS: Recommended for general applications. For temperatures up to 500°F
302 SS: Recommended for general applications. For temperatures up to 500°F
304 SS: Recommended for general applications. For temperatures up to 450°F
316 SS: Recommended for general applications. For temperatures up to 400°F
Elgiloy: Greater chemical and temperature resistance. Meets NACE MR-01-75. For temperatures up to 600°F
17-7 PH SS: Standard for Coil springs for general applications. For temperatures up to 500°F
Inconel 718: For extreme temperatures up to 600°F
Other Materials: Nitrile, FKM, FFKM are also available for use as energizer materials.