TSH10 |
Burg-man H10 |
TSH8 |
Burg-man H8 |
Balanced design, ultra-short structure, arbitrary rotation direction and high speed.
It is widely used in high speed equipment.
Advantages:
Insensitive to solids in the medium
Very short axial installation length (analog lip seals) combined with high pressure capability
No damage of the shaft by dynamically loaded O-Ring
Due to the stationary design insensitive to shaft misalignements
Compact ready-to-install unit
Material combinations:
Sealing face: Graphite, silicon carbide, tungsten carbide, alumina
Secondary seal: nitrile rubber, fluoro rubber, ethylene propylene rubber
Metal components: stainless steel
Operating parameters
Specification: 15 ~ 100 mm
Pressure: ≤ 2.5 Mpa
Temperature: -20 ~ 250 °C
Linear speed: ≤ 35 m / s,
Axial movement: ± 0.5 mm
Inner diameter |
15-48mm available(H8)
50-100mm available(H10) |
Pressure |
up to 2.5Mpa |
Temperature |
-20~250°C |
Speed |
up to 35m/s |
Pictures of H8-50mm: