H10 / H8
*) The stationary seat design is chosen according to the specific requirements and conditions of operation.
Features
- Single seal
- Balanced
- Independent of direction of rotation
- Stationary multiple springs
Advantages
- Insensitive to solids in the medium
- Very short axial installation length (analog lip seals) combined with high pressure capability
- No damage of the shaft by dynamically loaded O-Ring
- Due to the stationary design insensitive to shaft misalignements
- Compact ready-to-install unit
Operating range
Shaft Diameter:
d1 = 15 ... 100 mm (0.6" … 3.9")
Pressure: p1 = 25 bar (363 PSI)
Temperature:
t = -40 ... +180 °C (-40 °F … 356 °F)
Sliding velocity: vg = 35 m/s (115 ft/s)
Materials
Seal face: Carbon graphite antimony impregnated (A), Carbon graphite resin impregnated (B)
Recommended applications
- Process industry
- Chemical industry
- Water and waste water technology
- Roller seal
- Bearing seal
- All seal chambers with a very short axial installation length
- Product variants
- Dimensions