15 Inch Lapping & Polishing Machine for Seal Faces

• Customization: Available
• Type: Disc Grinder
• Power Source: Pneumatic
• Model NO.: 15 inch-3R/VS
• Object: Turning Tool
• Application: Mechanical Seal Faces
• Material: Cast Iron Plate
• Working Style: Three-roll
• Disc Diameter: 465mm
• Variable Speed: With Variable Speed
• Transport Package: Trisun Standard or Customised
• Specification: polishing rings max od at 130mm
• Trademark: Trisun, Nuetral or customised
• Origin: Made in China
• HS Code: 8460902000
• Production Capacity: 100 Sets/Year

Product Description

We supply polishing machines in 15 inch, 18 inch, 24 inch and 36 inch.

15-18 inch is suitable for repair the seal face and mainly the seal or pump repair company purchase .
 
And
 
24-  26 inch is better from seal manufacturer .
 

 

15 inch polishing machine is automatic liquid spray, and there is a time and speed control system that can adjust the polishing speed by lapping different materials.
 
If polish the SIC and TC, you can adjust the speed quickly. If polish CE or CA, you can slow down the speed.

Brief description:
 

• Only manufacturer to design and provide a rigid Spindle Housing, hardened spindle with heavy duty bearings lubricated for life.
• The geared motor is attached to the bottom of the Spindle housing. The spindle shaft enters the gearbox and is firmly attached and secure.
• The entire axial load from the top including the weight of lap plate, rings, dead weights/pneumatic pressure and all are taken up by the center plate and the bearings directly.
• This design directly increases the life of the gearbox and ensure trouble free running for life. The gearbox is lubricated for life.

Standard Features:

- Power supply & Frequency can be customized.
- Bonfiglioli geared motor with an output of max 70 rpm, lubricated for life.
- 0.50 Hp, 1 to 3 Ph, Telemecanique VFD stepless speed up to 70 rpm.
- Electrical Operator Panel with digital timer and digital rpm indicator.
- Slurry tray with wiper, outlet pipe for recircullation directly into the slurry tank, located inside at the rear of the machine.
- Slurry pump, slurry divider, flow regulator and  slurry outlet to the lap plate in case of abrasive lapping.
- Floor standing model, complete powder coated and ready for start up.

Standard Toolings: 
- 1 no of Graded cast iron lap plate of diameter 381 mm approx
- 3 nos of combo geared rings rings with id 140 *70 mm,
- 3 nos of dead weights 
- 3 nos of felt pads
- 3 nos of Hylam carriers
- conditioning rings of height 70 mm approx with combo outer design, half plain and half geared for reversal
- 3 nos of nylon side guide rollers & 1 no of nylon geared central roller drum 
- 1 ring reversal T-key for direction of ring rotation
- 1 set rigid spindle housing + precision spindle with heavy duty bearings spindle set lubricated for life 

 

Weight & Dimensions:
Gross weight-----250 kgs approx.
Dimensions----------L 122* W 77 * H 132 CMS approx.